Tailgate windscreen wiper motor by Bermudan 75


User avatar
Bermudan 75
My thanks to to Lyndon, Duncan and Steve who pointed me in the right direction with my hammer and chisel on removing the rear wiper spindle from the glass. The spindle has been thoroughly cleaned and reassembled. This now moves freely as it should do.

I checked fuse 42 (Rear wiper fuse) and replaced the blown fuse. Turned on the rear wiper and nothing happened.

So am I correct to assume that the next thing to do is to replace the motor? The reason I ask is that the replacement fuse did not blow. I would have thought that it would have blown if the motor was switched on again, and was siezed up?

Mike
Image

Posted 13 Mar 2012, 10:42 #1 

User avatar
Duncan
Check for power at the motor first. It could be a number of things.
Image

Posted 13 Mar 2012, 16:58 #2 

User avatar
Arctic
(Trader)
I always thought the rear wiper only worked if you were reversing the car and the wipers are switched on or am i having a elder moment :gmc: because i suppose this is what your were doing if so just ignore me :) Arctic
Pearl Firefrost
ARCTIC

Posted 13 Mar 2012, 20:13 #3 

User avatar
Duncan
No, there's a switch on the stalk so you can put them on yourself.
Image

Posted 13 Mar 2012, 20:32 #4 

User avatar
Bermudan 75
Now fixed. I replaced the motor with a second hand unit from ebay, £31 delivered.

The original motor had burnt out, probably due to the spindle having been seized.
Image

Posted 17 Mar 2012, 16:58 #5 

User avatar
Raistlin
Pleased to see that this saga ended well Mike :)
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 17 Mar 2012, 17:40 #6 


Top

cron