2 Speed Fan Question by carlpenn



carlpenn
Could someone please advise me if there is anyway of swapping the 2 Speed fan from a Diesel to a Petrol model, without altering the Wiring?

Do the Resistors just plug straight in or is there more Wires to the resistor on the Petrol than the Diesel?

The reason I ask is because I was investigating why my 2.5 V6 Cooling Fan was not working and I found this:

Image

Image

The Fan has come away from the Motor.

I assume refitting is out of the Question, because the Blade is no longer secure

Thanks in Advance :)
Upgrades:

Fitted Electric Memory Seat, Leather Cubby Lid, Wood Dash, Message Centre.

Posted 16 Mar 2013, 15:54 #1 

User avatar
takestock
refit plastic fan to motor and twist into position, drill and tap centre of fan blades and motor ;)
Photobucket = Tossers

Dave....

Posted 16 Mar 2013, 22:04 #2 

User avatar
Arctic
(Trader)
Hi Carl
As above or as we have emailed i can change for one i have or even bring over the fan blades i have and try one of those if yours is to loose Arctic.
Pearl Firefrost
ARCTIC

Posted 17 Mar 2013, 02:40 #3 

User avatar
Duncan
A touch of superglue before refitting worked for me, as mine fell off after a new motor was fitted.
Image

Posted 17 Mar 2013, 09:49 #4 


carlpenn
A big thanks to Steve for popping round this afternoon and helping me stick the Fan back together. CAr now all back together and Fan working as it should.

:D
Upgrades:

Fitted Electric Memory Seat, Leather Cubby Lid, Wood Dash, Message Centre.

Posted 17 Mar 2013, 17:04 #5 

User avatar
Jürgen
(Site Admin)
:thumbsup: Well done!

Posted 17 Mar 2013, 18:43 #6 


Top

cron