135 Diesel Remap - Help Needed Please by Mad-Monkey



Mad-Monkey
I would quite like to have a crack at this over the summer, work is usually blissfully quiet, and all of my essential and important projects are now finished. I'm now just basically pottering around until September ;) with a bit of work inbetween of course! :D

For me to stand a chance of trying to understand the unlock codes, I need to lay my hands of a few first. I did ask on the other forum and it didn't seem to spark much interest.

Members who have had the upgrade from xpart will have been given a CD and a code, in the event of something going awol and the ECU (Engine Control Unit) needing to be recoded. If you have had this upgrade done, and you do not mind, please could you let me know, by PM, your unlock code and VIN (Vehicle Identification Number). They will be held in the strictest of confidence.

Xpart calculate the code with software so I suspect its going to be bloody hard to work out, so the more codes I have the better. :thumbsup:

Many Thanks

Posted 29 Jun 2010, 08:09 #1 

User avatar
Raistlin
I did give you mine David.

Have you still got the details?
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 29 Jun 2010, 17:23 #2 


Mad-Monkey
Sorry Paul, I haven't. I had a problem with a USB stick and lost a load of work, unfortunately your data was on it. Any chance of getting it again?

Many Thanks

Posted 30 Jun 2010, 08:00 #3 

User avatar
Raistlin
Monk wrote:Sorry Paul, I haven't. I had a problem with a USB stick and lost a load of work, unfortunately your data was on it. Any chance of getting it again?

Many Thanks



I'll dig it out when I get home David :D
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 30 Jun 2010, 11:33 #4 


Mad-Monkey
Cheers Paul. Sorry for late reply, the thread didnt come up as new posts...

Posted 02 Jul 2010, 17:09 #5 

User avatar
Raistlin
Monk wrote:Cheers Paul. Sorry for late reply, the thread didnt come up as new posts...


I forgot to send you the info as well David :em:

I'll do so this minute, while I think about it :)
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 02 Jul 2010, 17:44 #6 

User avatar
Jürgen
(Site Admin)
Monk wrote:Members who have had the upgrade from xpart will have been given a CD and a code, in the event of something going awol and the ECU needing to be recoded.

Never got anything like this. :confused:

Posted 02 Jul 2010, 18:15 #7 

User avatar
JohnDotCom
You should have been given the information in case of any future problems etc.
Standard in UK, but cannot say for Germany.
The garage should have given it to you on work being completed Jürgen.
John

"My lovely car now sold onto a very happy new owner.
I still love this marque and I will still be around, preferred selling to breaking, as a great runner and performer"

Posted 02 Jul 2010, 22:08 #8 

User avatar
Jürgen
(Site Admin)
Well, it hasn't been some garage, but the German branch of MG Rover. So nowhere to complain about it these days. :hissyfit:

I'll have to keep my fingers crossed then, that I'll never need this information again. ;)

Posted 03 Jul 2010, 06:07 #9 

User avatar
Raistlin
Jürgen wrote:Well, it hasn't been some garage, but the German branch of MG Rover. So nowhere to complain about it these days. :hissyfit:

I'll have to keep my fingers crossed then, that I'll never need this information again. ;)


I should think that XPart will provide the information you need Jürgen if you have a receipt for the work having been done.
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 03 Jul 2010, 09:10 #10 

User avatar
Jürgen
(Site Admin)
Good point, Paul. As I do have a receipt, I now can have peace of mind, too.

Posted 03 Jul 2010, 09:22 #11 

User avatar
Raistlin
Jürgen wrote:Good point, Paul. As I do have a receipt, I now can have peace of mind, too.


You'll need to quote your VIN number as well I would think :)
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 03 Jul 2010, 10:26 #12 

User avatar
Jürgen
(Site Admin)
raistlin wrote:You'll need to quote your VIN number as well I would think :)

Yes, it's definitively used for generating the desired code.

Posted 03 Jul 2010, 10:33 #13 

User avatar
Raistlin
I would think that it can all be sorted out via e-mail Jürgen :)
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 03 Jul 2010, 10:37 #14 

User avatar
Raistlin
David,

I PMed you the details you wanted but you haven't read the PM :confused:
Paul

Cogito ergo sum... maybe?

Click the image to go to Nano-Meet Website
Image

Posted 03 Jul 2010, 10:42 #15 


Top